Thermal Conductive Epoxy Adhesive, Electrical Insulating, Slow Cure, Two 3mL Syringes

All-Spec #: 8329TCS-6ML-33018 MFG #: 8329TCS-6ML Alternate Part #:
  • 8329TCS
$11.34
$11.45
Each-EA
In stock: 1 EA 7 days
0.07 lbs per EA Canada
EA
1 Item must be ordered in multiples of 1
  • Product Information
  • Technical Information

The MG Chemicals 8329TCS-6ML is a thermally conductive epoxy adhesive with a mix ratio of 1:1.

The MG Chemicals 8329TCS-6ML Features:
  • Good low temperature alternative to 1-part TC adhesives with inconveniently high cure temperature
  • Excellent 1.44 W/(mK) thermal conductivity
  • Easy 1:1 mix ratio
  • Adheres to most electronic substrates
  • Strong water and chemical resistance to brine, acids, bases and aliphatic hydrocarbons
The MG Chemicals 8329TCS-6ML Specifications:
  • Product Type: Thermally Conductive Epoxy Adhesive
  • Hardness: 62Shore D
  • Color: Dark Gray
  • Primary Color: Gray
  • Mix Ratio: 1:1
  • Physical Form: Liquid
  • Cure Time: 20min
  • Viscosity Measurement: Part A:8800 Part B:780Pa/s
  • Shelf Life: ≥3yr
  • Chemical Composition: Part A:Aluminum Oxide, Zinc Oxide, Methylenebis, Epoxy Phenol Novalak Resin, Boron Nitride Part B:Aluminum Oxide, Zinc Oxide, Fatty acids, Polymers, Boron Nitride
  • Specific Gravity: Part A:2.41 Part B:2.48
  • Odor: Part A:Slight Part B:Ammonia
  • Cure Type: Room Temperature
  • Dielectric Strength: 168 165V/mil
  • Elongation at Break: 7%
  • Tensile Strength‎: 11.4N/mm²
  • Maximum Operating Temperature: +302°F
  • Minimum Operating Temperature: -40°F
  • Container Capacity: 6ml
  • Container Type: Syringe
  • Applications: Electrical and Electronics, Heat Sink Bonding, High-Powered LED Adhesive
  • Country of Origin: Canada
  • Carton Quantity: 1
  • Brand Name: MG Chemicals
  • Product Type: Thermally Conductive Epoxy Adhesive
  • Hardness: 62Shore D
  • Color: Dark Gray
  • Primary Color: Gray
  • Mix Ratio: 1:1
  • Physical Form: Liquid
  • Cure Time: 20min
  • Viscosity Measurement: Part A:8800|Part B:780Pa/s
  • Shelf Life: 1825 Days From Date of Manufacture
  • Chemical Composition: Part A:Aluminum Oxide, Zinc Oxide, Methylenebis, Epoxy Phenol Novalak Resin, Boron Nitride|Part B:Aluminum Oxide, Zinc Oxide, Fatty acids, Polymers, Boron Nitride
  • Specific Gravity: Part A:2.41|Part B:2.48
  • Odor: Part A:Slight|Part B:Ammonia
  • Cure Type: Room Temperature
  • Dielectric Strength: 168|165V/mil
  • Elongation at Break: 7%
  • Maximum Operating Temperature: +302°F
  • Minimum Operating Temperature: -40°F
  • Container Capacity: 6ml
  • Container Type: Syringe
  • Applications: Electrical and Electronics, Heat Sink Bonding, High-Powered LED Adhesive
  • Manufacturer: MG Chemicals