NR-205 No-Clean Wave Solder Flux Pen, 6 per Package

All-Spec #: 116844-PENS-1998 MFG #: 116844-PENS
$9.49 Each-EA
Quantity Price
1 $9.49
72 $8.42
216 $7.57
In stock: 625 EA 6 days
0.07 lbs per EA United States
1 Item must be ordered in multiples of 1
  • Product Information
  • Technical Information
Alpha® NR205Flux Pens are a halide-free, rosin/resin free, low solids, no-clean flux. It is formulated for wave soldering of through-hole, mixed technology and surface mount assemblies. The flux is particularly effective when soldering in an inert atmosphere. The flux produces a tack-free surface with high surface insulation resistance and very little residue to interfere with electrical testing. Alpha® NR205 fully conforms to the requirements of Bellcore TR-NWT-000078. The flux has been specifically formulated to resist degradation in surface insulation resistance and electromigration, even in situations where the flux does not experience soldering temperatures and when heavy levels of flux have been applied. The residues are non-corrosive and do not cause "greening" when in contact with copper or copper-bearing alloys.Alpha NR205 is particularly well-suited for touch-up/rework when supplied in a flux pen. Alpha €œWriteFlux€ pens make local flux application an easily controlled process.FEATURES & BENEFITS High activity Meets bellcore requirements & other critical sir tests Very safe residues Non-corrosive residues Good soldering in air excellent soldering in nitrogen for low defects High reliability assemblies, even when the flux does not experience soldering temperatures Excellent for touch-up/rework applications Will not cause "greening" on exposed copper/copper alloysAPPLICATIONAlpha® NR205 flux is designed for foam, spray, and wave applications. Topside preheat temperatures of 80-105°C (180-220°F) are recommended. Flux solids can be monitored using Alpha's Flux Solids Control Kit #3. If thinning is required, the use of Alpha 493 thinner is recommended. For applications which specify cleaning, a water cleaning step with Alpha® 2110 saponifier or Alpha® Autoclean 40, after soldering, will remove any slight traces of flux residues.For application via the flux pen, the nib should be lightly wiped on and around the solder joint to be reworked. Once a suitable amount of flux has been applied the manual soldering operation can be performed.Technical SpecificationsAppearance: Clear, colorless liquidSolids Content, wt/wt: 2.15Specific Gravity @ 25°C (77°F): 0.797 ± 0.002Acid Number (mg KOH/g): 16.5 ± 1.0Halides: NONEFlash Point (T.C.C.): 13°C (56°F)Recommended Thinner: 493Packaging: 1 & 5 gallon containers and in €œWrite Flux€ flux pens.IPC J-STD-004 Designation ORL0
  • Country of Origin: United States
  • Carton Quantity: 72
  • Brand Name: Alpha
  • Color: Clear Colorless
  • Flash Point: 13 Deg C
  • Specific Gravity: 0.797
  • Manufacturer: Alpha