US_HISCO_SPIRE
Kester logo

186-18 Mildly Activated Rosin Soldering Flux, 1 Gallon

Hisco #:63-0018-0186-44800

MFG #:63-0018-0186

This item has a required storage/handling temperature range outside of ambient. Please review the TDS for more information.
This item is a hazardous material and MAY be subjected to extra shipping charges/fees. If the product requires extra charges, ground hazmat items will be charged a $30.00 fee per carton and air hazmat items will be charged a $60 fee per carton.
Made in the USA
Our Price: $82.89 GA
List Price: 90.30 GA
Manufacturer Lead Time When Not In Stock18 days
Minimum Order QTY: 1
Item must be ordered in multiples of 1
QuantityPriceSave
182.89
480.46Save 3%
1278.17Save 6%

HazardousThis item is hazardous and may be subject to an additional handling fee.

The Kester 63-0018-0186 is a non-corrosive, non-conductive, low solids 186-18 RMA flux.

Kester 63-0018-0186 Specifications:
  • QPL approved as Type RMA under MIL-F-14256
  • Fluxing ability approaches that of Type RA flux
  • Flux residue after soldering is non-corrosive and non-conductive
  • Developed for use in critical applications where difficult assemblies are to be soldered, but process requirements stipulate use of Type RMA flux
  • High thermal stability for soldering multi-layer assemblies which require a high preheat temperature
  • Exposure to high preheat temperatures does not degrade solubility of residue in normal cleaning solvents
  • No degradation of surface insulation resistance caused by the flux residue
  • Minimal use of ionic activating agents and the inactive nature of the residue permits leaving the residue on circuit board assemblies for many applications
  • Flux residue is moisture and fungus resistant
  • Percentage of Solids (typical): 18%
  • Container Size: 1 Gallon

Product Description

HazardousThis item is hazardous and may be subject to an additional handling fee.

The Kester 63-0018-0186 is a non-corrosive, non-conductive, low solids 186-18 RMA flux.

Kester 63-0018-0186 Specifications:
  • QPL approved as Type RMA under MIL-F-14256
  • Fluxing ability approaches that of Type RA flux
  • Flux residue after soldering is non-corrosive and non-conductive
  • Developed for use in critical applications where difficult assemblies are to be soldered, but process requirements stipulate use of Type RMA flux
  • High thermal stability for soldering multi-layer assemblies which require a high preheat temperature
  • Exposure to high preheat temperatures does not degrade solubility of residue in normal cleaning solvents
  • No degradation of surface insulation resistance caused by the flux residue
  • Minimal use of ionic activating agents and the inactive nature of the residue permits leaving the residue on circuit board assemblies for many applications
  • Flux residue is moisture and fungus resistant
  • Percentage of Solids (typical): 18%
  • Container Size: 1 Gallon

Technical Information

BrandKester
Product TypeSolder Flux
Shelf Life730 Days From Date of Manufacture
Flash Point18 Deg C
Length12.0 in.
Width6.0 in.
Height6.0 in.
ColorAmber
Maximum Storage Temperature80
Minimum Storage Temperature60
Specific Gravity0.879
Weight: 10
Country Of Origin: US
Our Price: $82.89 GA
List Price: 90.30 GA
 
Minimum Order QTY: 1
Item must be ordered in multiples of 1
North America's Premier Distributor of Mission Critical Materials ® © 2008-  Copyright Hisco, Inc. Industrial Distributor. All rights reserved