- ABS Plastic Welding Rod (1)
- Actuator Assembly (1)
- Adjustment Plate (1)
- Applicator Repair Kit (1)
- Atomizing Head (1)
- Brush Tip (2)
- Cartridge Wiper (1)
- Conversion Kit (2)
- Dispensing Retainer (1)
- Drive Assembly (1)
- End Cap (2)
- Feed Line Tubing (3)
- Finger Switch (2)
- Fluid Element Assembly (1)
- Foot Switch (2)
- HDPE Plastic Welding Rod (1)
- Heater Assembly (1)
- Hose (2)
- Junction Box (1)
- Light Blocking Shield (1)
- Lint Roller (3)
- Male Connector (1)
- Manual Plunger (2)
- Mounting Bracket (1)
- Mounting Rail (2)
- Needle Cover (2)
- Nest Assembly (1)
- Operation Box (1)
- O-Ring Seal (1)
- Pistol Grip Handle (1)
- Plastic Head Assembly (1)
- Plunger (5)
- Plunger Assembly (1)
- Power Supply (1)
- PP Plastic Welding Rod (1)
- Pump Head (1)
- Receiver Head Assembly (4)
- Replacement Filter (1)
- Replacement Plunger (2)
- Ridge PVC Welding Rod (1)
- Rubber Stopper (1)
- Screw Mount Blade (1)
- Seal (1)
- Slip-Luer Cap (2)
- Syringe Adapter (15)
- Syringe Adapter Assembly (2)
- Syringe Air Stopper (3)
- Syringe Airline Adapter (1)
- Syringe Finger Switch Assembly (1)
- Syringe Holder (2)
- Syringe Plunger (1)
- Syringe Stand (1)
- Thermostat (2)
- Tip Cap (2)
- 0.07in (1)
- 0.09in (1)
- 0.12in (1)
- 0.63in (1)
- 1.6 mm OD x 1.0 mm ID x 65.6 ft L (1)
- 1.8mm (1)
- 1/4 in MNPT x Female Luer (1)
- 1/4 in NPT x Female Luer (1)
- 1/4 in OD x 33 ft L (1)
- 1/4in (1)
- 10 cc (2)
- 10 mL (1)
- 10cc (9)
- 10in H (1)
- 10in L (1)
- 10ML (2)
- 1-5/8 in (Dia.) (1)
- 18ga (2)
- 2 mm O.D x 1.4 mm I.D x 65.6 ft (1)
- 2 x 9 x 2in (1)
- 2.0 mm OD x 1.4 mm ID x 65.6 ft L (1)
- 2.1 mm I.D. (1)
- 20.8 mm Width (1)
- 3 cc Syringe (1)
- 30 cc (3)
- 30 cc/50 cc (1)
- 30 mL (1)
- 30/50cc (8)
- 30/55cc (3)
- 300 mL Cartridge (1)
- 300ML (1)
- 30cc (1)
- 3-3/4 in L (1)
- 360mm (1)
- 3cc (3)
- 3ML (1)
- 4 in x 29 ft (1)
- 45ml (1)
- 5 in x 5 in (1)
- 5 micron (1)
- 5/32in (1)
- 50 mL (1)
- 50ml (1)
- 5cc (4)
- 8-3/4 in L (1)
- 9 g (0.32 oz.) (1)
- 9 in x 1.5 in x 0.4 in (4)
- 0-100 PSI regulator and Gauge (1)
- 160 psi Pressure (1)
- Accept Dispense Needle Tips That Slide Over The End Of The Cap (2)
- Adapter Cable, 9-pin female D-shell to 3.5 MM Plug (1)
- Allows for Multiple Dispense Points and Curing to Increase Throughput (1)
- Allows Multiple Systems Integration Simultaneously, Accepts Up to 8 Inputs and 8 Outputs (1)
- Converts the Standard 1:1/ 2:1 Applicator to A 4:1 Ratio Dispense Applicator (1)
- Converts the Standard 1:1/2:1 Applicator to A 4:1 Ratio Dispense Applicator (1)
- Design to Seal Inlet Side of Syringe Barrel to Ensure No Contaminants Come In Contact with Material During Storage and Shipment (2)
- Designed with Large Flat Bottom, The Stand-Up Tip Cap Enables The Syringe Barrel to Stand Upright (1)
- Double Helix Brush Tips for Spread Applications Such As Glues and Other Materials (2)
- Double-Acting Cylinder Allows Adjustable Opening and Closing Speeds for Accurate Process Control, Operational with Pressure-Time Applications, Dispenses Fluids up to 15,000 cps (2)
- Easy Cleaning without Valve Demounting, Field Serviceable, Easy Integration with Loctite Reservoirs and Controllers (1)
- Easy Programming Controller, with Storage Capacity for 25 User Defined Programs, Reduces Adhesive Set-Up Waste, Smallest Footprint on The Market to Conserve Bench Top Space, Automatic Syringe Engagement to Ensure Easy and Error-Free Syringe Changeove (1)
- Eliminates Placing Dispense Valve Or Syringe on Work Surfaces and Protects Dispense Needles From Contamination (1)
- Flexible Hose Minimizes Interference and Tangling, Portable Length Hose is Easy-to-Use While Hand-Carrying Adhesive Tank, Lightweight Nylon Tube with Synthetic Rubber Coating Improves Control and Reduces Fatigue, Fits Easily and Securely Fastens to a (1)
- High Resolution Stroke Adjustment, Fail sage-air to open, spring closed, Easy cleaning without valve demounting (1)
- It Can Be Attached to Any Size Syringe Or Valve, As an Alternative to the Electronic Foot Pedal (1)
- Lint Roller Made with Scotch Adhesive (2)
- Low Voltage, Push Button Finger Switch Controls Dispense Cycle (1)
- Plate Allows for Up to 5 Inches of Rough Adjustment of the Location of the Mounting Rail Above Or Below the Mounting Hole In the Robot (1)
- Prevent any Bending, Breaking or Outside Contamination (2)
- Prevent UV Or Visible Light From Curing the Adhesive, the Tip of the Dispense Needle Will Pass Thru the End of Blocking Shield While the Majority of the Needle is Protected From Light Sources (1)
- Prevents an air bubble from getting into the feedline and passing along to the valve, Eliminates the need for purging the system of an air bubble at bottle changes (1)
- Provides Full-Barrel Swivel, Horizontal and Vertical Adjustment, Accepts All Efd Barrels (1)
- Quick Push-to-Connect Inlet for 1/4 inch or 5/32 inch Adapter Hose (2)
- Receiver Head Assembly with Connecting link between time/pressure Controllers and Syringe Assemblies (4)
- Reduces Primer Consumption, Minimizes Overspray, Boosts Productivity, Lowers Primer Spraying Time, Decreases Primer Sanding Time, Reduces Clean-Up, Reduces Gun Cleaning Time, Uses Less Solvent for Clean Up, Decreases Hazardous Disposal Cost, Improves (1)
- Replacement Black Fluid Element Assembly (1)
- Rotospray Drive Assembly Complete Less Spinner and Feed Tube (1)
- Smooth,Controlled Manual Dispensing (2)
- Specifically Designed to Fit All Jensen Global Air Syringes (1)
- Specifically Designed with an O-Ring Seal to Fit All Jensen Global Air Syringes (14)
- The 98327 mounting bracket kit is designed for holding 97113 or 97114 valve when using Loctite® 3 or 4 axis robots. The "C" rail connection allows for more than one bracket to be used when using 3 axis robots. This allows for multiple dispense points (1)
- The Loctite® Air Line Filter/Regulator/Gauge provides pressure regulation and inline air filtration to optimize the performance of hot melt applicators. The filter/regulator comes complete with integrated pressure gauge and mounting bracket. The pres (1)
- The SCARA Robot Requires an Operation Box to Run (1)
- Unique Design Works with All Manufacturer's Syringes, 360° Swivel on Adapter Head for Ease of Motion, Produces Repeatable Shots of Material and Requires Minimal Clean-Up (2)
- Vertical Syringe Stand Is A Convenient Way to Hold Syringes When Not In Use. Eliminates Placing Syringe on Work Surfaces and Protects Dispense Needles From Contamination (1)
167 items
-
CircuitWorksAll-Spec #: CW2000-9700 MFG #: CW2000 Alternate Part #:
- CW2000
Availability: 22 In Stock 07/26/2019 8 days- Brand Name: CircuitWorks
- ESD-Safe: Yes
- For Use With: Circuit Boards
-
LoctiteAll-Spec #: 318654-30769 MFG #: 318654 Alternate Part #:
- 98013
Out of Stock 13 days$781.29 / Each-EA- Brand Name: Loctite
- For Use With: Loctite® Cyanoacrylate Adhesives.
- Material: UHMW Polyethylene
-
Jensen GlobalAll-Spec #: JG30A-BLL-20-27210 MFG #: JG30A-BLL-20Availability: 6 In Stock 8 daysCall for Pricing / Bag-BG
- Brand Name: Jensen
- For Use With: Dispensing Controller and Adapter
- Size: 30 cc
-
LoctiteAll-Spec #: 88644-30769 MFG #: 88644 Alternate Part #:
- 97113
Out of Stock 18 days$1,125.77 / Each-EA- Brand Name: Loctite
- Length: 7.3in
- Width: 1.5in
-
Jensen GlobalAll-Spec #: JG30A-G-20-27210 MFG #: JG30A-G-20Availability: 6 In Stock 9 daysCall for Pricing / Box-BX
- Brand Name: Jensen Global
- Size: 30 cc/50 cc
- Color: White Stopper
-
LoctiteAll-Spec #: 717765-30769 MFG #: 717765 Alternate Part #:
- 98499
Out of Stock 14 days- Brand Name: Loctite
- For Use With: Syringe
- Color: Orange
-
LoctiteAll-Spec #: 720223-30769 MFG #: 720223
Out of Stock 16 days$13.35 / Piece-PC
- Brand Name: Loctite
- For Use With: Caulking Gun
- Manufacturer: Loctite
-
LoctiteAll-Spec #: 1244445-30769 MFG #: 1244445Out of Stock 07/27/2019 12 days$164.04 / Each-EA
- Brand Name: Loctite
- Color: White
- Primary Color: White
-
LoctiteAll-Spec #: 218275-30769 MFG #: 218275
Out of Stock 9 days$8.14 / Package-PK
- Accessory Type: Tip Cap
- For Use With: Disposable Dispense Components
- Color: Red
-
Jensen GlobalAll-Spec #: JG30A-BLL-27210 MFG #: JG30A-BLLAvailability: 690 In Stock 7 days
- Material: Polypropylene
- Material Category: Plastic
- Color: Clear
-
Jensen GlobalAll-Spec #: JG805FS-27210 MFG #: JG805FS Alternate Part #:
- 651-159
Out of Stock 08/04/2019 8 days$44.78 $45.00 / Each-EA- Brand Name: Jensen Global
- Accessory Type: Finger Switch
- For Use With: JGD500T shot meter and other electronic dispensing controllers
-
MetcalAll-Spec #: 93055-3RHB-33709 MFG #: 93055-3RHB
Availability: 19 In Stock 18 days$21.99 $22.69 / Each-EA
- Series: 700
- Accessory Type: Receiver Head Assembly
- For Use With: 924-DFV Series Foot Valve Dispenser
-
3MAll-Spec #: 00021200979279-31196 MFG #: 836RS-56SMOut of Stock 7 days
- Brand Name: 3M Scotch-Brite
- Accessory Type: Lint Roller
- Special Features: Lint Roller Made with Scotch Adhesive
-
Jensen GlobalAll-Spec #: JG30A-G-27210 MFG #: JG30A-GAvailability: 14000 In Stock 7 days
- Accessory Type: Syringe Air Stopper
- For Use With: Pneumatically-operated air syringe barrels
- Size: 30/50cc
-
LoctiteAll-Spec #: 1001830-30769 MFG #: 1001830 Alternate Part #:
- 410-2026
Out of Stock 10 days$114.88 / Each-EA- Accessory Type: Feed Line Tubing
- For Use With: Benchtop Peristaltic Dispenser
- Size: 2 mm O.D x 1.4 mm I.D x 65.6 ft
-
LoctiteAll-Spec #: 88657-30769 MFG #: 88657 Alternate Part #:
- 97208
Availability: 1 In Stock 10 days$42.61 / Package-PK- Brand Name: Loctite
- Accessory Type: Syringe Airline Adapter
- For Use With: Syringe Barrels Kit, Adhesive Dispensing Equipment
| Description | Brand Name | ESD-Safe | Series | Reviews | Availability | Price | U/M | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CW2000-9700
MFG #: CW2000
|
CircuitWorks | Yes | Availability: 22 In Stock 07/26/2019 8 days |
$12.13
$13.78
Quantity Pricing
|
/ Package-PK | ||||||||||||
|
Loctite | Out of Stock 13 days | $781.29 | / Each-EA | |||||||||||||
|
Jensen | Availability: 6 In Stock 8 days | Call for Pricing | / Bag-BG | View Details | ||||||||||||
88644-30769
MFG #: 88644
|
Loctite | Out of Stock 18 days | $1,125.77 | / Each-EA | |||||||||||||
|
Jensen Global | Availability: 6 In Stock 9 days | Call for Pricing | / Box-BX | View Details | ||||||||||||
|
Loctite | Out of Stock 14 days |
$122.06
Quantity Pricing
|
/ Package-PK | |||||||||||||
|
Loctite | Out of Stock 16 days | $13.35 | / Piece-PC | |||||||||||||
|
Loctite | Out of Stock 07/27/2019 12 days | $164.04 | / Each-EA | |||||||||||||
|
Out of Stock 9 days | $8.14 | / Package-PK | ||||||||||||||
|
Availability: 690 In Stock 7 days |
$0.53938
$0.55
Quantity Pricing
|
/ Syringe-SZ | ||||||||||||||
|
Jensen Global | Out of Stock 08/04/2019 8 days | $44.78 $45.00 | / Each-EA | |||||||||||||
93055-3RHB-33709
MFG #: 93055-3RHB
|
700 | Availability: 19 In Stock 18 days | $21.99 $22.69 | / Each-EA | |||||||||||||
|
3M Scotch-Brite | Out of Stock 7 days |
$31.20
Quantity Pricing
|
/ Case-CA | |||||||||||||
|
|
Availability: 14000 In Stock 7 days |
$0.38607
$0.41
Quantity Pricing
|
/ Piece-PC | ||||||||||||||
|
Out of Stock 10 days | $114.88 | / Each-EA | ||||||||||||||
|
Loctite | Availability: 1 In Stock 10 days | $42.61 | / Package-PK |
Add to Cart
We cannot add the specified quantity to your cart; only the available inventory or less can be purchased. The reason is either the product has been discontinued by the manufacturer or is a clearance/overstock item.
All available inventory has been added to your cart.
×
You have reached the maximum number of items (6).
Please 'Compare' or remove items.
×