Thermally Conductive Flowable Adhesive, Slow Cure, 25mL Dual Syringe

All-Spec #: 8329TFS-25ML-33018 MFG #: 8329TFS-25ML
$22.55 Syringe-SZ
Quantity Price
1 $22.55
3 $21.26
Availability: 2 In Stock 10 days
0.24 lbs per SZ Canada
SZ
1 Item must be ordered in multiples of 1
  • Product Information
  • Technical Information

The MG Chemicals 8329TFS-25ML is a thermally conductive, slow-cure two-part epoxy adhesive. It is off-white, smooth, thixotropic, and bonds well to a wide variety of substances. It is also flame retardant, and meets the UL 94V-0 standard. For a 1 mL quantity, a minimal service cure can be achieved in 15 minutes at room temperature, and a full cure in 4 hours.This product is used to bond heat sinks, LEDs and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems.For a longer working life, use 8329TFM or 8329TFS.

MG Chemicals 8329TFS-25ML Features:
  • Thermal conductivity of 0.8 W/(m·K)
  • 1:1 mix ratio
  • Working life: 45 minutes
  • Cure time: 24 hours at room temperature or 15 minutes at 65 °C (149 °F)
  • Flame retardant-meets UL 94V-0 standard
  • Provides strong electrical insulation
  • Low CTE prior Tg
  • High tensile and compressive strength
  • Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
  • Shelf life: ≥3 years
  • RoHS 3 compliant
  • Container size: 25mL Dual Syringe
MG Chemicals 8329TFS-25ML Specifications:
  • Working life @22 °C [72 °F]: 4 hours
  • Shelf life @22 °C [72 °F] a) : ≥3 y
  • Full cure @22 °C [72 °F]: Heat cure only
  • Full cure @65 °C [149 °F]: 3 h
  • Full cure @80 °C [176 °F] :80 min
  • Constant service temperature: -40 to 150 °C [-40 to 302 °F]
  • Maximum intermittent temperature: 175 °C [347 °F]
  • Storage temperature: 22 to 27 °C [72 to 81 °F]
  • Country of Origin: Canada
  • Carton Quantity: 1
  • Series: 8329
  • Product Type: Thermally Conductive Adhesive
  • Hardness: 68 Shore D
  • Color: Part A:Dark Gray;Part B:Gray
  • Primary Color: Part A:Dark Gray;Part B:Gray
  • Mix Ratio: 1:1
  • Physical Form: Liquid
  • Cure Time: 80 min
  • Viscosity Measurement: >20.5 mm²/s
  • Chemical Composition: Part A:aluminum oxide;phenol, polymer with formaldehyde, glycidyl ether;zinc oxide;alkyl glycidyl ether;bisphenol-A epoxy resin (reaction product);carbon black;Part B:aluminum oxide;zinc oxide;fatty acids, c18-unsat, dimer, polymers, w/3,3'- (Oxybis(
  • Specific Gravity: Part A:2.2;Part B:2
  • Odor: Part A:Slight;Part B:Amine-Like
  • Cure Type: Room Temperature;Heat Cure
  • Dielectric Strength: 220 V/mil
  • Maximum Operating Temperature: +302 °F
  • Minimum Operating Temperature: -40 °F
  • Container Capacity: 0.84 fl oz
  • Container Type: Dual Syringe
  • Applications: Bond Heat Sinks, LEDs and Other Heat-Generating Components in Electronic Assemblies
  • Manufacturer: MG Chemicals