US_HISCO_SPIRE
Glyptal logo

Glyptal 1201B Insulating Enamel, 1 qt, Red

Hisco #:1201BQ-21717

MFG #:1201BQ

This item is a hazardous material and MAY be subjected to extra shipping charges/fees. If the product requires extra charges, ground hazmat items will be charged a $30.00 fee per carton and air hazmat items will be charged a $60 fee per carton.
Made in the USA
WARNING: This product can expose you to chemicals or other substances which are known to the State of California to cause cancer or reproductive toxicity. For more information, go to www.P65Warnings.ca.gov.
Our Price: $49.79 QT
List Price: 49.89 QT
Manufacturer Lead Time When Not In Stock8 days
Minimum Order QTY: 1
Item must be ordered in multiples of 1
QuantityPriceSave
149.79
346.95Save 6%

HazardousThis item is hazardous and may be subject to an additional handling fee.

The Glyptal 1201BQ is a red, alkyd resin enamel paint that comes in a 3.98lb/cal container. The water and heat resistant paint is ideal for coils and armatures.

Glyptal 1201BQ Features:
  • Resin Type: Alkyd Enamel
  • Color: Red
  • Primary Color: Red
  • Finish: Low Gloss
  • Dry Time: 2h
  • Container Size: 1qt
  • Resistance Properties: Water Resistant, Heat Resistant, Arc Resistant, Chemical Resistant
  • Quick-Drying (Yes/No): Yes
  • VOCs Content: 3.98lb/gal
  • Applications: Treatment of Coils And Armatures, Internal Coatings for Engines, General Plant Maintenance, Primer and Finish for Motor, Generator and Transfer Housings, Anti-Moisture Coating on Thermostat, Water Cooler, and Truck Control Parts, Sealer for Pipe and Stud
Glyptal 1201BQ Specifications:
  • Meets requirements of MIL-E-22118
  • Flexibility is far superior to competitive red sealers on both backed and air-dried films. 1201 can take rugged impact
  • Water Resistance is excellent
  • Prolonged aging doesn't crack 1201's film, leaves no place for destructive agents to get in
  • Fast drying 1201 is tack-free in about 30 minutes at room temperature, can be baked to a beautiful smooth finish
  • Heat Resistance. 1201 has got it, can withstand continuous 135°C temperature for months
  • Prolonged Heat. After 3700 hours at 35°C, there is no change in dielectric strength
  • Toughness. High-gloss paints have a tender film. 1201 has a low-gloss finish, designed for great resistance to abrasion
  • Adhesion. 1201 hangs on, stays where it's put-on metals, ceramic, porcelain, concrete, fibers and wood
  • Dielectric strength is rated at 1500 volts per mil, permits thinner coating than most competitive paints
  • Arc Resistance, even with air-dried films, is 480 seconds

Product Description

HazardousThis item is hazardous and may be subject to an additional handling fee.

The Glyptal 1201BQ is a red, alkyd resin enamel paint that comes in a 3.98lb/cal container. The water and heat resistant paint is ideal for coils and armatures.

Glyptal 1201BQ Features:
  • Resin Type: Alkyd Enamel
  • Color: Red
  • Primary Color: Red
  • Finish: Low Gloss
  • Dry Time: 2h
  • Container Size: 1qt
  • Resistance Properties: Water Resistant, Heat Resistant, Arc Resistant, Chemical Resistant
  • Quick-Drying (Yes/No): Yes
  • VOCs Content: 3.98lb/gal
  • Applications: Treatment of Coils And Armatures, Internal Coatings for Engines, General Plant Maintenance, Primer and Finish for Motor, Generator and Transfer Housings, Anti-Moisture Coating on Thermostat, Water Cooler, and Truck Control Parts, Sealer for Pipe and Stud
Glyptal 1201BQ Specifications:
  • Meets requirements of MIL-E-22118
  • Flexibility is far superior to competitive red sealers on both backed and air-dried films. 1201 can take rugged impact
  • Water Resistance is excellent
  • Prolonged aging doesn't crack 1201's film, leaves no place for destructive agents to get in
  • Fast drying 1201 is tack-free in about 30 minutes at room temperature, can be baked to a beautiful smooth finish
  • Heat Resistance. 1201 has got it, can withstand continuous 135°C temperature for months
  • Prolonged Heat. After 3700 hours at 35°C, there is no change in dielectric strength
  • Toughness. High-gloss paints have a tender film. 1201 has a low-gloss finish, designed for great resistance to abrasion
  • Adhesion. 1201 hangs on, stays where it's put-on metals, ceramic, porcelain, concrete, fibers and wood
  • Dielectric strength is rated at 1500 volts per mil, permits thinner coating than most competitive paints
  • Arc Resistance, even with air-dried films, is 480 seconds

Technical Information

BrandGlyptal
Resin TypeAlkyd Enamel
ColorRed
Primary ColorRed
FinishLow Gloss
Dry Time2h
Container Size1qt
Resistance PropertiesWater Resistant; Heat Resistant; Arc Resistant; Chemical Resistant
VOCs Content3.98lb/gal
ApplicationsTreatment of Coils And Armatures, Internal Coatings for Engines, General Plant Maintenance, Primer and Finish for Motor, Generator and Transfer Housings, Anti-Moisture Coating on Thermostat, Water Cooler, and Truck Control Parts, Sealer for Pipe and
Flash Point84.2 Deg F
Maximum Storage Temperature85
Minimum Storage Temperature50
Shelf Life730 Days From Date of Manufacture
Storage ConditionsN/A
Weight: 3
Country Of Origin: US
Our Price: $49.79 QT
List Price: 49.89 QT
 
Minimum Order QTY: 1
Item must be ordered in multiples of 1
North America's Premier Distributor of Mission Critical Materials ® © 2008-  Copyright Hisco, Inc. Industrial Distributor. All rights reserved