FR-872 ESD-Safe Temperature Controlled Infrared Preheater with Four Zones, 122 - 392°F Range

FR872-03-3021 MFG #: FR872-03
$1,694.87 / EA
Available to Order - 0 on Hand
  • Brand Name: Hakko
  • ESD-Safe: Yes
  • Dimensions: 21.1 x 14.2 x 3.8in
  • For Use With: Medium to High-Mass Board Assemblies
  • Height: 3.8in
  • Includes: FR-872 4-Bank IR Pre-Heater, A5003 High Efficiency Carbon Filament IR Heater, B3516 Thermocouple, B5042 Power Cord, Instruction Manual
  • Length: 21.1in
  • Minimum Operating Temperature: +122°F
  • Power Rating: 1440W
  • Product Type: IR Pre-Heater
  • Standards Met: cMETus Listed
  • Voltage Rating: 120V ac
  • Width: 14.2in

The Hakko FR872-03 is a is a low profile, bench-top PCB board preheater designed to elevate the temperature of printed circuit board assemblies so that components on them can be soldered and de-soldered more easily, and with improved results. This is particularly useful on medium to high-mass board assemblies, which can “heat-sink” a significant amount of energy being supplied by a soldering iron tip, or handheld hot air tool. The FR-872 is particularly useful when soldering Pb-Free assemblies..

The Hakko FR872-03 Features:
  • High efficiency carbon filament IR heating lamps
  • 4 independent switchable heat zones
  • 8.8 x 10.5 in (224 x 266 mm) effective heating area
  • Manual or Auto operation modes
  • Preheat controlled by Power percentage or Thermocouple for closed-loop feedback of the PCB heating
  • Ramp Control that controls the ramp rate of the PCB when using either of the thermocouple modes of temperature control
  • Soft EPO to protect assemblies
  • Automatic operation following a 3-heating zone profile that can be programmed into the system (with up to 20 possible profiles)
  • Faster than ceramic IR heating
The Hakko FR872-03 Specifications:
  • Product Type: IR Pre-Heater
  • For Use With: Medium to High-Mass Board Assemblies
  • Power Rating: 1440W
  • Voltage Rating: 120V ac
  • Maximum Operating Temperature: +392°F
  • Minimum Operating Temperature: +122°F
  • Dimensions: 21.1 x 14.2 x 3.8in
  • Length: 21.1in
  • Width: 14.2in
  • Height: 3.8in
  • ESD Safe (Yes/No): No
  • Includes: FR-872 4-Bank IR Pre-Heater, A5003 High Efficiency Carbon Filament IR Heater, B3516 Thermocouple, B5042 Power Cord, Instruction Manual
  • Standards Met: cMETus Listed
Pack: Each
QTY
  • Videos
https://youtube/embed/f0i7F47BBvU