US_HISCO_SPIRE
Fluke logo

Documenting Process Calibrator for All Common Process Paramenter with HART communications

Hisco #:FLUKE-754-19816

MFG #:FLUKE-754

This item cannot be exported outside of the United States.
Made in the USA
Our Price: $10,413.99 EA
Manufacturer Lead Time When Not In Stock35 days
Minimum Order QTY: 1
Item must be ordered in multiples of 1
QuantityPriceSave
110413.99
39986.62Save 4%

The Fluke FLUKE-754 is a documenting process calibrator with built-in HART® interface capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.

Fluke FLUKE-754 Features:
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Holds up to a full week of downloaded procedures and calibration results
  • Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc
  • Easy to use
  • Three year warranty
  • Bright white dual display
  • Multi lingual interface
  • Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge
  • Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms
  • Delivered with DPC/Track Sample software
  • Compatible with many Asset Management software packages
FLUKE-754 HART Capabilities:
  • Requires no external box or second tool for everyday HART calibration and maintenance
  • Offers fast HART communication
  • Supports popular models of HART transmitters, with more devise-specific command support than any other HART field calibrator
  • Works with multiple masters, burst mode, and multi-drop configurations
  • Is easy to update as additional instruments are added and new HART versions are released
  • Interrogate to determine device type, manufacturer, model, tag
  • Reconfigure the sensor mapping of dual sensor temperature transmitters
  • Read HART PV function and smart transmitter digital output while measuring analog mA output
  • Read and write HART configuration functions to make field adjustments to PV range points, damping, and other top-level configuration settings
  • Re-label smart transmitters by reading and writing to the HART tag field
Fluke FLUKE-754 Specifications:
    DC voltage measurement/accuracy
    100 mV0.02% + 0.005 mV
    3 V0.02% + 0.00005 V
    30 V0.02% + 0.0005 V
    300 V0.05% + 0.0 V
    AC voltage measurement/accuracy
    3 V(40 Hz to 500 Hz)/0.001 V0.5% + 0.002 V
    30 V(40 Hz to 500 Hz)/0.01 V0.5% + 0.02 V
    300 V(40 Hz to 500 Hz)/0.1 V0.05% + 0.2 V
    DC current measurement/accuracy
    30 mA0.01% + 5 µ A
    110 mA0.01% + 20 µ A
    DC resistance measurement/accuracy
    10Ω0.05% + 50 mΩ
    100Ω0.05% + 50 mΩ
    1 kΩ0.05% + 50 mΩ
    10 kΩ0.1% + 10 Ω
    DC frequency measurement/accuracy
    1.0 to 110 Hz / 0.01 Hz0.05 Hz
    110.1.0 to 1100 Hz / 0.01 Hz0.5 Hz
    1.101 to 11.0 kHz / 0.01 kHz0.005 kHz
    11.01 to 50 kHz / 0.001 kHz0.05 Hz
    DC voltage source/accuracy
    100 mV0.01% + 0.005 mV
    1.0 V0.01% + 0.00005 V
    -15 V0.01% + 0.01& + 0.0005 V
    DC current source/accuracy
    22 mA0.01% + 0.003 mA
    DC resistance source range
    10Ω0.01% + 10 mΩ
    100Ω0.01% + 20 mΩ
    1 kΩ0.02% + 0.2 Ω
    10 kΩ0.02% + 3 Ω
    DC frequency source/accuracy
    0.1 to 10.99 Hz0.01 Hz
    0.01 to 10.99 Hz0.01 Hz
    11.0 to 109.99 Hz0.1 Hz
    110.0 to 1099.9 Hz0.1 Hz
    1.10 to 21.999 kHz0.002 kHz
    22.0 to 50 kHz0.005 kHz
  • FLUKE-754 Includes:
    • BC7240 battery charger
    • Li-on BP7240 battery pack
    • DPCTrack 2Ω sample software
    • Instruction manual
    • NIST-traceable calibration report and data
    • Three sets of TP220 test probes with three sets of "extended tooth" alligator clips
    • Two sets AC280 hook clips
    • C799 soft field case
    • USB communication cable
  • Product Description

    The Fluke FLUKE-754 is a documenting process calibrator with built-in HART® interface capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.

    Fluke FLUKE-754 Features:
    • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
    • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
    • Power transmitters during test using loop supply with simultaneous mA measurement
    • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
    • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
    • Holds up to a full week of downloaded procedures and calibration results
    • Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc
    • Easy to use
    • Three year warranty
    • Bright white dual display
    • Multi lingual interface
    • Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge
    • Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms
    • Delivered with DPC/Track Sample software
    • Compatible with many Asset Management software packages
    FLUKE-754 HART Capabilities:
    • Requires no external box or second tool for everyday HART calibration and maintenance
    • Offers fast HART communication
    • Supports popular models of HART transmitters, with more devise-specific command support than any other HART field calibrator
    • Works with multiple masters, burst mode, and multi-drop configurations
    • Is easy to update as additional instruments are added and new HART versions are released
    • Interrogate to determine device type, manufacturer, model, tag
    • Reconfigure the sensor mapping of dual sensor temperature transmitters
    • Read HART PV function and smart transmitter digital output while measuring analog mA output
    • Read and write HART configuration functions to make field adjustments to PV range points, damping, and other top-level configuration settings
    • Re-label smart transmitters by reading and writing to the HART tag field
    Fluke FLUKE-754 Specifications:
      DC voltage measurement/accuracy
      100 mV0.02% + 0.005 mV
      3 V0.02% + 0.00005 V
      30 V0.02% + 0.0005 V
      300 V0.05% + 0.0 V
      AC voltage measurement/accuracy
      3 V(40 Hz to 500 Hz)/0.001 V0.5% + 0.002 V
      30 V(40 Hz to 500 Hz)/0.01 V0.5% + 0.02 V
      300 V(40 Hz to 500 Hz)/0.1 V0.05% + 0.2 V
      DC current measurement/accuracy
      30 mA0.01% + 5 µ A
      110 mA0.01% + 20 µ A
      DC resistance measurement/accuracy
      10Ω0.05% + 50 mΩ
      100Ω0.05% + 50 mΩ
      1 kΩ0.05% + 50 mΩ
      10 kΩ0.1% + 10 Ω
      DC frequency measurement/accuracy
      1.0 to 110 Hz / 0.01 Hz0.05 Hz
      110.1.0 to 1100 Hz / 0.01 Hz0.5 Hz
      1.101 to 11.0 kHz / 0.01 kHz0.005 kHz
      11.01 to 50 kHz / 0.001 kHz0.05 Hz
      DC voltage source/accuracy
      100 mV0.01% + 0.005 mV
      1.0 V0.01% + 0.00005 V
      -15 V0.01% + 0.01& + 0.0005 V
      DC current source/accuracy
      22 mA0.01% + 0.003 mA
      DC resistance source range
      10Ω0.01% + 10 mΩ
      100Ω0.01% + 20 mΩ
      1 kΩ0.02% + 0.2 Ω
      10 kΩ0.02% + 3 Ω
      DC frequency source/accuracy
      0.1 to 10.99 Hz0.01 Hz
      0.01 to 10.99 Hz0.01 Hz
      11.0 to 109.99 Hz0.1 Hz
      110.0 to 1099.9 Hz0.1 Hz
      1.10 to 21.999 kHz0.002 kHz
      22.0 to 50 kHz0.005 kHz
  • FLUKE-754 Includes:
    • BC7240 battery charger
    • Li-on BP7240 battery pack
    • DPCTrack 2Ω sample software
    • Instruction manual
    • NIST-traceable calibration report and data
    • Three sets of TP220 test probes with three sets of "extended tooth" alligator clips
    • Two sets AC280 hook clips
    • C799 soft field case
    • USB communication cable
  • Technical Information

    BrandFluke
    Product TypeData Logging Devices
    Height2.0 in.
    Width5.0 in.
    Length9.0 in.
    AvailabilityIn Stock
    Weight: 2.7
    Country Of Origin: US
    Our Price: $10,413.99 EA
     
    Minimum Order QTY: 1
    Item must be ordered in multiples of 1
    North America's Premier Distributor of Mission Critical Materials ® © 2008-  Copyright Hisco, Inc. Industrial Distributor. All rights reserved