Series 2 Standard Type Dial Indicator with Lug Back and Jeweled Bearing, .0001-.5" Range

2358S-10-65737 MFG #: 2358S-10
$227.00 / EA
Available to Order - 0 on Hand
  • Brand Name: Mitutoyo
  • Series: 2
  • Product Type: Dial Indicator
  • Maximum Measurement: 0.5in
  • Accuracy: ±0.008in
  • Graduation: 0.0001in
  • Stem Size: 3/8in
  • Dial Reading: 0 to 10
  • Imperial or Metric: Imperial
  • Thread Type: 4-48 UNF
  • Length: 5.0 in.
  • Width: 3.0 in.
  • Height: 2.0 in.

The Mitutoyo 2358S-10 is a Series 2 dial indicator with a graduation of 0.0001.

The Mitutoyo 2358S-10 Features:
  • The outer clamp and lifting lever can be attached to either the right or left side. These parts can be easily installed and removed without tools
  • Secure adhesion between the bezel and crystal as well as the use of an O-ring prevents water or oil penetration
  • A carbide contact point is used
  • The stem and plunger are made of high-strength quench-hardened stainless steel which resists arduous use
  • A special alloy is used for the sector gears to provide improved wear resistance
  • The indicator uses jewelled bearings, providing excellent indication sensitivity and durability
  • Application of a hard coating on the surface of the crystal makes it highly resistant to scratching and chemical attack
The Mitutoyo 2358S-10 Specifications:
  • Series: 2
  • Product Type: Dial Indicator
  • Maximum Measurement: 0.5in
  • Accuracy: ±0.008in
  • Graduation: 0.0001in
  • Stem Size: 3/8in
  • Dial Reading: 0 to 10
  • Measuring Force: ≤2N
  • Imperial or Metric: Imperial
  • Thread Type: 4-48 UNF
Pack: Each
QTY